Replacement tubing kit for ÄKTA avant 25

Flow path scheme ÄKTAavant 25

Inlet tubing

The table below shows the labels, diameters and the standard lengths of the inlet tubing. The inlet tubing is mounted on delivery.

Label	Description	Tubing	Length (mm)
A1 - A7	Inlets to Inlet valve A	PTFE, o.d. 1/8", i.d. 1.6 mm	1500
B1 - B7	Inlets to Inlet valve B	PTFE, o.d. 1/8", i.d. 1.6 mm	1500
Q1 -Q4	Inlets to Quaternary valve	PTFE, o.d. 1/8", i.d. 1.6 mm	1500
Buff	Buffer inlet to Sample inlet valve	PTFE, o.d. 1/8", i.d. 1.6 mm	1000
S1 - S7	Inlets to Sample inlet valve	PTFE, o.d. 1/8", i.d. 1.6 mm	700
InQA	From Quaternary valve to Inlet valve A	PTFE, o.d. 1/8", i.d. 1.6 mm	110
InQB	From Quaternary valve to Inlet valve B	PTFE, o.d. 1/8", i.d. 1.6 mm	110
InA	From Inlet valve A to System pump A	PTFE, o.d. 1/8", i.d. 1.6 mm	220
InB	From Inlet valve B to System pump B	PTFE, o.d. 1/8", i.d. 1.6 mm	220
InS	From Sample inlet valve B to Sample pump	PTFE, o.d. 1/8", i.d. 1.6 mm	220

 

High pressure tubing

The table below shows the labels, diameters and the standard lengths of the high pressure tubing. The high pressure tubing is mounted on delivery.

Label	Description	Tubing	Length (mm)
1A1	System pump A left to Restrictor A	PEEK, o.d. 1/16", i.d. 0.75 mm	340
1A2	System pump A right to Restrictor A	PEEK, o.d. 1/16", i.d. 0.75 mm	340
2A	Restrictor A to Pressure monitor	PEEK, o.d. 1/16", i.d. 0.75 mm	100
1B1	System pump B left to Restrictor B	PEEK, o.d. 1/16", i.d. 0.75 mm	340
1B2	System pump B right to Restrictor B	PEEK, o.d. 1/16", i.d. 0.75 mm	340
2B	Restrictor B to Pressure monitor	PEEK, o.d. 1/16", i.d. 0.75 mm	100
1S1	Sample pump left to Restrictor S	PEEK, o.d. 1/16", i.d. 0.75 mm	340
1S2	Sample pump right to Restrictor S	PEEK, o.d. 1/16", i.d. 0.75 mm	340
2S	Restrictor S to Pressure monitor	PEEK, o.d. 1/16", i.d. 0.75 mm	100
3	Pressure monitor to Mixer	PEEK, o.d. 1/16", i.d. 0.75 mm	280
3S	Pressure monitor S to Injection valve	PEEK, o.d. 1/16", i.d. 0.75 mm	485
4	Mixer to Injection valve	PEEK, o.d. 1/16", i.d. 0.75 mm	400
5	Injection valve to Column valve	PEEK, o.d. 1/16", i.d. 0.50 mm	180
6	Column valve to UV monitor	PEEK, o.d. 1/16", i.d. 0.50 mm	160
7	UV monitor to Conductivity monitor	PEEK, o.d. 1/16", i.d. 0.50 mm	100
8	Conductivity monitor to pH valve	PEEK, o.d. 1/16", i.d. 0.50 mm	165
9	pH valve to Outlet valve	PEEK, o.d. 1/16", i.d. 0.50 mm	215
1R	To Flow restrictor	PEEK, o.d. 1/16", i.d. 0.50 mm	75
2R	From Flow restrictor	PEEK, o.d. 1/16", i.d. 0.50 mm	75
Frac	Outlet valve to fraction collector	PEEK, o.d. 1/16", i.d. 0.50 mm	1280

 

Reference capillaries

The table below shows the labels, diameters and the standard lengths of the reference capillaries.

Label	Description	Tubing	Length (mm)
Ref 1	Reference capillary	PEEK, o.d. 1/16", i.d. 0.25 mm	400
Ref 2	Reference capillary	PEEK, o.d. 1/16", i.d. 0.13 mm	700

Outlet tubing

The table below shows the labels, diameters and the standard lengths of the outlet tubing.

Label	Description	Tubing	Length (mm)
Out1 - Out 32	Outlets from Outlet valve	PTFE, o.d. 1/8", i.d. 1.6 mm	1000

 

Waste tubing

The table below shows the labels, diameters and the standard lengths of the waste tubing. The waste tubing is mounted on delivery.

Label	Description	Tubing	Length (mm)
W1	System pump waste	o.d. 1/16", i.d. 1.0 mm	1900
W2	Sample pump waste	o.d. 1/16", i.d. 1.0 mm	1900
W3	pH valve waste	o.d. 1/16", i.d. 1.0 mm	1900
W	System waste	o.d. 1/16", i.d. 1.0 mm	1900
N/A	Top tray waste	o.d. 12 mm, i.d. 8 mm	2500
N/A	Frac front waste	o.d. 12 mm, i.d. 8 mm	2100
N/A	Frac back waste	o.d. 12 mm, i.d. 8 mm	1600